Neschen Solvoprint Glass Deco Mint 80mic 6039786 54" 1370mm x 20m roll

Description

Neschen Solvoprint Glass Deco Mint 80mic: This 80mic polymeric soft-PVC film has a translucent pastel mint sandblast effect that is easy to apply and a great choice for creative window decorations.  Suitable for use with Eco-solvent, Latex, UVC and screenprinting inks this product has an environmentally friendly, permanent water-based adhesive.

The Solvoprint® Glass Deco PVC films are all “dry-apply”, eliminating the need to use application liquids thus saving time. Using innovative air-matrix technology, fine air channels are created in the adhesive, allowing for fast application and adjustment. Bubbles and creases in the film can easily be avoided. 

FEATURES:

• 80 µm Polymeric Soft-PVC
• Translucent pastel mint sandblast effect
• B1 Certificate according DIN 4102-1
• Washable and resistant to a large number of detergents and solvents
• Easy to apply due to micro-channels in adhesive
• Reduced adhesive strength minimizes risk of “stress whitening”
• Printable with (eco)-solvent-, latex- and UV-curable inks as well as screenprinting inks
• Recommended for indoor applications (e.g. on shop windows the media should be applied at the interior side of the glass) – outdoor applications feasable based on Neschen technical informations
• Environmentally friendly, permanent water-based adhesive
• 3" core, printside outside

APPLICATIONS:

• Decoration & Labelling film
• Suitable for cutting plotters
• Milk glass effect
• Printable

PROCESSING & HANDLING:

• Dry application only.  The prevents any accumulation of water within the channels which could cause white colouring of the adhesive
• Use cotton gloves to avoid fingerprints on the media
• When applied to windows it is recommended to leave a 2mm gap between film and rubber gasket to avoid any accumulation of water and possible reduction of adhesive strength
• To prevent stripes in the adhesive film the liner should be removed evenly
• When cutting filigree/small letters it is recommended to use a sharp knife and adjust speed
• Usage of PVC application tape with moderate adhesive strength (e.g 2N/25mm) is endorsed
• Due to the increased UV radiation when printing with UV-Curable inks, life of the PVC film may be reduced. 
• To avoid any unwelcome scratches on the surface of the film it is recommended to use a very soft squeegee.  These scratches will remain in the film when applied on glass and will not disappear.
• After plotting the films should be stored & dispatched laying flat
• Possible adhesive residues can be easily removed using denatured alcohol or benzene